|
| |
Bevel-Mill Bench Top Models
-
Deburr-Chamfer edges easily
-
Uses standard carbide inserts
-
Adjustable depth of cut
-
Use on any steel or aluminum & stainless
steel
| Item |
Description |
|
Model VA-400 |
- Produce Bridgeport Mill quality finishes fast
without any set-up
- Variable angle
- Adjustable V-Block gap for thin materials
|
Model BB27 |
- Chamfer or deburr any material from plastic
to hardened steel
- Ideal for finish chamfers or machined parts
- One pass deburring or chamfering
- Easily adjustable depth of cut
- Uses a standard abrasive flap disc
- Cast aluminum frame
- Ground cast iron table
|
| Bevel-Mill |
VA400 |
BB125 |
| Min. work piece thickness |
1/16" - 1.75mm |
1/8" - 3.2mm |
| Minimum bevel |
0 |
0 |
| Maximum bevel (B) |
3/16" - 4.7mm |
1/8" - 3.24mm |
| Bevel angle |
15-45° |
fixed 45° |
| V-block length |
18" - 454mm |
12" -303mm |
| Number of inserts |
6 |
6 |
| Motor |
1hp 110 volt |
1/2hp 110 volt |
| Weight |
70 lbs - 31kg |
50lbs - 22kg |
|
